23
ZN
System Manual
Section 2 UPGRADING THE SYSTEM
Section 2
Setup Methods Suited to Specific Applications
4-2. Constant feedback
Set this method to stabilize cleanliness in the booth (area) at all times.
Selecting the air volume level control method
1. Display [CNTRL] on the main display.
2. Select [AUTO].
Set air volume level control of the Air Clean Unit
to automatic.
3. Press the ENT key.
This sets the selected mode.
Selecting the feedback method
4. Display [FBTYP] on the main display.
Set the feedback method.
5. Display [CONST] on the sub-display.
6. Press the ENT key.
This sets the constant feedback method.
Setting the target cleanliness
7. Display [CLASS] on the main display.
8. Select the target cleanliness class.
2sysup.fm23ページ２００７年６月２８日 木曜日 午前９時１７分
To Next Page
Loading...
