Status attributes Crocus CNV
110 Reference manual
7.5 Management status attributes
The attributes cardSlotNumber, cardNestNumber and position are only present on a Crocus CNV Card Version,
not on a Table Top.
crocusIfConv<2m/Nx64><Tt/Cv>/management/ifSpeed
This attribute displays the current management interface speed in bits per second (bps), e.g. 9600.
crocusIfConv<2m/Nx64>Cv/management/cardNestNumber
This attribute displays the CN4 card nest address.
It is possible to manage the Crocus CNV with the Orchid 1003 LAN management concentrator. In that
case, the address of the CN4 card nest has to be known so that the Orchid can address the Crocus CNV.
The CN4 card nest address can be set with DIP switches at the back of the card nest. For more
information, refer to the CN4 manual.
crocusIfConv<2m/Nx64>Cv/management/cardSlotNumber
This attribute displays in which slot of the CN4 card nest the Crocus CNV is situated.
It is possible to manage the Crocus CNV with the Orchid 1003 LAN management concentrator. In that
case, the Crocus CNV its position in the CN4 card nest has to be known so that the Orchid can address
the Crocus CNV.
crocusIfConv<2m/Nx64>Cv/management/position
This attribute displays the position of the converter (A or B) on the Card Version.
It is possible to manage the Crocus CNV with the Orchid 1003 LAN management concentrator. In that
case, the position of the converter on the card has to be known so that the Orchid can address that
particular converter.
To Next Page
Loading...