OneAccess Crocus CNV - Connecting the Interfaces of the Crocus CNV

Installing and connecting the Crocus CNV Crocus CNV
24 User manual
2.7 Connecting the interfaces of the Crocus CNV
The DTE/DCE definition of the Crocus CNV interfaces is as follows:
Interface DTE / DCE Interconnection cable
onboard G703 DTE To connect this interface to …
• a DTE device, use a crossed interconnection cable.
• a DCE device, use a straight interconnection cable.
modular DCE To connect this interface to …
• a DTE device, use a straight interconnection cable.
• a DCE device, use a crossed interconnection cable.
The following figure shows an example of a set-up with a Crocus CNV:
modem + G703 interface
(DCE)
Crocus CNV
modem + V36 interface
(DCE)
modular interface
(DCE)
straight
interconnection cable
crossed
interconnection cable
onboard G703 interface
(DTE)