Crocus CNV Step-by-step configuration
User manual 55
5.2 Loading the default configuration
If you install the Crocus CNV for the first time, all configuration attributes are set to their default value. If
the Crocus CNV has already been configured a number of times and you want to reconfigure it starting
from scratch, it might be best to load the default configuration.
Also, when you accidentally made a configuration error which, for some reason, makes the Crocus CNV
inaccessible for TMA, you can load the default configuration using the appropriate DIP switch. For
instance: you defined a password in the Crocus CNV but you can not remember it. In that case you can
not access the Crocus CNV with TMA if you do not supply the correct password.
You can load the default configuration
by means of …
For more information, refer to Section …
a DIP switch. 5.2.1 - The load default configuration DIP switch
an action in TMA. 5.2.2 - The Load Default Configuration action in TMA
To Next Page
Loading...