Performance attributes Crocus CNV
120 Reference manual
8.4 Operating system performance attributes
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/currUsedProcPower (%)
This is the amount of processing power used during the last 650 milliseconds, expressed as a
percentage of the total available processing power.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/freeDataBuffers
The processor uses buffers for storing the packets during processing and/or queuing. Each buffer has a
256 byte size, headers included. This attribute is the number of data buffers currently not in use and
available for e.g. incoming data.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/totalDataBuffers
This is the total number of available data buffers.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/largestFreeBlockSize
The processor uses RAM memory for storing internal information and buffering (see totalDataBuffers). The
different tasks allocate RAM memory on request. Tasks may also free memory again. In this way the total
RAM memory becomes fragmented. This attribute gives the size of the largest contiguous free memory
block expressed in bytes.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/freeBlockCount
This is the number of free contiguous memory blocks.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/freeMemory
This is the total free memory expressed in bytes.
crocusIfConv<2m/Nx64><Tt/Cv>/operatingSystem/totalMemory
This is the total RAM memory expressed in bytes.
To Next Page
Loading...