Need help?Do you have a question about the OneAccess Crocus CNV and is the answer not in the manual?
General| Brand | OneAccess |
|---|---|
| Model | Crocus CNV |
| Category | Media Converter |
| Language | English |
Overview of the Crocus CNV as an interface converter and its key features.
Details different Crocus CNV types (2M, Nx64) and versions (Table Top, Card).
Lists supported plug-in modular DTE interfaces compatible with the Crocus CNV.
Describes the CN4 card nest, its capacity, power options, and compatibility.
Outlines various management possibilities for the Crocus CNV (EasyConnect, CLI, ATWIN, TMA).
Essential safety warnings and precautions for installation and servicing the device.
Guidance on checking the shipping carton for damage and handling the unpacked unit.
Recommendations for choosing a suitable installation location considering environmental factors.
Discusses ESD/EMC precautions and specifies allowed interface connection types.
Details connecting the Table Top version, covering physical connections, power, and interface insertion.
Explains connecting the Card Version, including insertion into the CN4 card nest and interface connections.
Defines DTE/DCE for interfaces and explains the use of crossed/straight interconnection cables.
Overview of front panel LEDs, their labels, colors, and status modes.
Locates and explains the function of DIP switches and straps on the Table Top motherboard.
Locates and explains the function of DIP switches and straps on the Card Version motherboard.
Introduces the Total Maintenance Application (TMA) for device management.
Details connecting to the Crocus CNV using TMA via auxiliary connector or Orchid 1003 LAN.
Explains management attribute terminology: containment tree, group, object, attribute, value, action.
Explains how to interpret DIP switch configuration tables and TMA attribute strings.
Describes loading default configuration via DIP switches or TMA, useful after errors.
Explains how to configure the clocking mode, detailing attributes and modes.
Details G703 interface configuration, including coding modes, driver, and framing.
Covers configuration of specific interface attributes like RTS control and LAN filter.
Discusses management attributes, rules of thumb, and control connector purpose.
Explains how to activate the basic configuration using the "Send all attributes to device" button.
Provides a list and structure of all configuration attributes for the Crocus CNV.
Details general system attributes: sysName, sysContact, sysLocation, bootFromFlash.
Explains G703 interface configuration attributes: coding, tests, alarms.
Discusses configuration attributes for DTE interfaces (general and specific).
Covers management configuration attributes: CMS2 address, control connector purpose.
Lists status attributes by object type: general, G703, interfaces, management, OS.
Details general status attributes: sysDescr, sysObjectID, sysUpTime, flash versions.
Explains G703 interface status attributes: test status, signal quality, line attenuation.
Discusses status attributes for DTE interfaces: RS530, V35, V36, X21, Bridge.
Details management status attributes: interface speed, card slot, position.
Covers OS status attributes: task info, processor load, memory usage.
Provides an overview of performance attributes for G703 onboard and operating system.
Explains the purpose of performance info and timing intervals (2 hrs, 24 hrs, since boot).
Details G703 performance attributes: error counts, line attenuation, G826, G703 performance.
Explains OS performance attributes: processor usage, buffer status, memory.
Lists alarm attributes: general, G703 onboard, interface alarms.
Provides general info on alarm attributes: configuration, general alarms, signalling.
Details general alarms: notResponding, configChanged, power failures, with defaults.
Explains G703 alarms: linkDown, ais, sq, testActive, with defaults.
Describes interface-specific alarms, mainly linkDown for different DTE interfaces.
Guides on displaying the subsystem picture in TMA to visualize device status.
Explains elements and visual indications within the TMA subsystem picture.
Step-by-step instructions for downloading firmware using TMA.
Details using Total Memory Loader (TML) command-line tool for firmware downloads.
Explains forcing device into boot mode via DIP switch for firmware download.
Describes using Orchid 1003 LAN for efficient firmware updates on multiple devices.
Lists Crocus CNV types (2M, Nx64) and versions (CV, TT).
Provides G703 interface specs: connector, impedance, coding, speed.
Details management interfaces, connectors, and speeds.
Describes auxiliary connector layout and pin functions for management.
Lists input power recommendations and maximum power consumption.
Provides dimensions and weight for Table Top, Card Version, and CN4 Card Nest.
Outlines storage, transport, and stationary use conditions (humidity, temperature).
Lists safety compliance standards (EN60950, Class 1/3 equipment).
States compliance with ITU-T K.44 and ETSI ETS 300 386-2.
Lists EMC compliance standards (Emissions, Immunity, Harmonics, ESD).
Lists product info for Crocus CNV and DTE interfaces with sales codes.
To Next Page