Alarm attributes Crocus CNV
130 Reference manual
Default value The alarm … is generated …
alarmMask alarmLevel
codeConsistencyFail
when the software consistency imposed by the
Orchid 1003 LAN on the Crocus CNV fails. For
example, because of a loss of contact.
Check the status attribute o1003/nmsgroup/
softConsistencyStatus to determine the problem.
disabled 1
configConsistencyFail
when the configuration consistency imposed by the
Orchid 1003 LAN on the Crocus CNV fails. For
example, because of a loss of contact.
Check the status attributes o1003/nmsgroup/objectTable/
configState and configDiag to determine the problem.
disabled 1
To Next Page
Loading...