OneAccess Crocus CNV - Displaying the Subsystem Picture

TMA subsystem picture of the Crocus CNV Crocus CNV
134 Reference manual
10.1 Displaying the subsystem picture
To display the subsystem picture of the Crocus CNV, proceed as follows:
Step Action
1 Establish a link between TMA and the Crocus CNV through the auxiliary connector.
Refer to Section 4.2 - Connecting to a Crocus CNV with TMA.
2
In the TMA window, press on the subsystem picture button:
.
The subsystem picture is
displayed:
3
To close the subsystem picture, press
.