DIP switches and straps of the Crocus CNV Crocus CNV
34 User manual
Straps JP21, JP23, JP25 and JP27
Use the straps JP21, JP23, JP25 and JP27 in order to select between the RJ45 connector or the BNC
connectors.
Strap setting You can connect to the onboard G703 interface through …
1 – 2 (default)
the RJ45 connector.
2 – 3
the BNC connectors.
Straps JP6, JP7 and JP29
Use the straps JP6, JP7 and JP29 in order to select the line impedance of the onboard G703 interface.
Strap setting The line impedance of the onboard G703 interface is …
1 – 2 (default)
120 ohm.
2 – 3
75 ohm.
1 2 3
1 2 3
1 2 3
1 2 3
To Next Page
Loading...