OneAccess Crocus CNV - Page 17

Crocus CNV Introduction
User manual 7
Management concentrator
Connecting the Crocus CNV to a management concentrator (e.g. the Orchid 1003 LAN or 1035 Orchid)
offers the following possibilities:
• Using the management concentrator as an IP proxy agent, you have the possibility to connect to the
Crocus CNV over an IP network. In that case you can establish an IP connection with the Crocus CNV
and run TMA, TMA CLI or the Web Interface over this connection. Using Telnet, you can also run
ATWIN and CLI.
For more information on how to use the management concentrator as an IP proxy agent, refer to the
manual of the management concentrator.
• Using the management concentrator as an SNMP proxy agent, you can manage the Crocus CNV
through SNMP.
For more information on how to use the management concentrator as an SNMP proxy agent, refer to
the manual of the management concentrator.
• The management concentrator allows you to manage the Crocus CNV with TMA for HP OpenView,
the OneAccess integrated management application that runs on the HP OpenView platform.
To find out more about TMA for HP OpenView, refer to the TMA for HP OpenView manual.
Management overview
The following table gives an overview of all the management possibilities and how you can connect them:
PC – Crocus CNV connection PC – management concentrator
connection
Management
tool
Serial IP Serial IP
EasyConnect
X
X
CLI
X
(1)
X
(1)
X
(2)
ATWIN
X
(1)
X
(1)
X
(2)
TMA
X
X X
TMA CLI
X
X X
TMA for HPOV
X
SNMP
(3)
X
Web Interface
(4)
X
(1)
Using a VT100 terminal (emulation program).
(2)
Using Telnet.
(3)
Using any SNMP browser.
(4)
Using a web browser.