52
4
If you are using a Notebook:
1. First, follow the steps above to adjust resolution of the
computer.
2. Press the toggle output settings. Example: [Fn]+[F4]
Acer
�
[Fn]+[F5]
Asus � [Fn]+[F8]
Dell
�
[Fn]+[F8]
Gateway � [Fn]+[F4]
Mac Apple:
System Preference � Display � Arrangement � Mirror
display
IBM/Lenovo
�
[Fn]+[F7]
[Fn]+[F4]
HP/Compaq
NEC �
�
[Fn]+[F3]
Toshiba � [Fn]+[F5]
If you experience diculty changing resolutions or your
monitor freezes, restart all equipment including the projector.
The screen of the Notebook or PowerBook computer is
not displaying your presentation
4
If you are using a Notebook:
Some Notebooks may deactivate their own screens when a
second display device is in use. Each has a dierent way to
be reactivated. Refer to your computer’s manual for detailed
information.
Image is unstable or ickering
4
Use Phase to correct it. See page 35 for more information.
4
Change the monitor color setting on your computer.
Image has vertical ickering bar
4
Use Frequency to make an adjustment. See page 35 for more
information.
4
Check and recongure the display mode of your graphic card
to make it compatible with the projector.
Image is out of focus
4
Make sure the lens cap is removed.
4
Adjusts the Focus Ring on the projector lens.
4
Make sure the projection screen is between the required
distances from the projector. See page 19 for more
information.
Appendices
Downloaded From projector-manual.com Optoma Manuals
To Next Page
Loading...
