Optoma TX779 - Installation and Mounting

English
69
Ceiling Installation
To prevent damage to your projector please use the recommended
mounting package for installation.
To ensure compliance, only use a UL Listed ceiling mount and
screws that meet the following speci󰘰cations:
4
Screw Type: M4
4
Maximum screw length: 11 mm
4
Minimum screw length: 9 mm
Refer to the following diagram to ceiling mount the projector.
v Damage to the
projector as a
result of
incorrect
installation
voids the
warranty.
v Ensure at least
10cm clear-
ance between
the ceiling and
the underside
of the projector.
v Avoid locating
the projector
near heat
sources
such as air
conditioning
and heaters.
Excess heat
may cause the
projector to
power o󰘯.
>@


>@
>@

>@

>@ 
>@ 
>@

>@

>@

>@

>@ 
>@

>@

>@

8QLWPP
Appendices
Downloaded From projector-manual.com Optoma Manuals