48
LAN_RJ45
For simplicity and ease of operation, the Optoma projector provides
diverse networking and remote management features.
The LAN/RJ45 function of the projector through a network, such as
remotely manage: Power On/O, Brightness and Contrast settings. Also,
projector status information, such as: Video-Source, Sound-Mute, etc.
LAN_RJ45
1.
Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop).
2.
On the PC (Laptop), select Start -> Control Panel-> Network Connections.
3. Right Click on your Local Area Connection, and select Property.
4. In the Properties window, select the
General tab, and select Internet
Protocol (TCP/IP).
v Projector
connects to
LAN, please
use Ethernet
Normal Cable.
v Peer-to-peer
(PC connects
to Projector
directly),
please use
Ethernet
Crossover
Cable.
User Controls
Downloaded From projector-manual.com Optoma Manuals
To Next Page
Loading...
