56
Replacing the Lamp
The projection lamp should be replaced when it burns out. It should
only be replaced with a certied replacement part, which you can
order from your local dealer.
Important:
4
The lamp contains a certain amount of mercury and should be
disposed of according to local ordinance regulations.
4
Avoid touching the glass surface of the new lamp, doing so may
shorten its operation life.
Warning:
4
Be sure to turn o and unplug the projector at least an hour before
replacing the lamp. Failure to do so could result in a severe burn.
1
2
3
Appendices
Downloaded From projector-manual.com Optoma Manuals
To Next Page
Loading...
