23
On-screen Display Menus
The Projector has multilingual On-screen Display menus that allow you to
make image adjustments and change a variety of settings. The projector will
automatically detect the source.
How to operate
1. To open the OSD menu, press Menu on the Remote Control or
Projector Keypad.
2. When OSD is displayed, use ◄► keys to select any item in the
main menu. While making a selection on a particular page, press
▼ or
Enter to enter sub menu.
3. Use ▲▼ keys to select the desired item and adjust the settings by
◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press
Enter to conrm, and the screen will return to the main
menu.
6. To exit, press
Menu again. The OSD menu back to last level
projector will automatically save the new settings.
User Controls
Downloaded From projector-manual.com Optoma Manuals
To Next Page
Loading...
