Oracle SPARC User Manual

Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)
This setting configures the host to stop at the OpenBoot prompt instead of automatically
booting the preinstalled OS.
c.
Click Save.
Note - You have 10 minutes to perform the next step. After 10 minutes, the state automatically
returns to normal.
4.
In the left navigation panel, click Host Management > Power Control.
5.
Select Reset from the pull-down menu, and click Save.
6.
In the left navigation panel, click Remote Control > Redirection.
7.
Select Use Serial Redirection, and click Launch Remote Console.
As the host resets, messages are displayed in the serial console. The OpenBoot prompt is
displayed when the reset activity completes.
Related Information
■
“OpenBoot Overview” on page 13
■
“Configuring Boot and Restart Behavior” on page 43
■
“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39
■
“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40
42 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Oracle SPARC Specifications

General

Operating System	Oracle Solaris
Virtualization	Oracle VM Server for SPARC
Processor	SPARC
Threads per Core	8
Memory Type	DDR4
Storage	SAS, SATA
Security Features	Cryptographic Acceleration