EasyManuals Logo

Oracle storagetek sl150 Reference Manual

Oracle storagetek sl150
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #112 background imageLoading...
Page #112 background image
Mode Sense (6)
112 SL150 Interface Reference Manual Julyl 2017
Fibre Channel Port Control Page Definitions:
PS
The Parameters Saveable bit is set to 0.
SPF The library returns a value of:
0 = SubPage Format bit, indicating page_0 format is being used.
Protocol Identifier
This field is set to:
0h that indicates the Fibre Channel protocol.
DTFD
Disabled Target Fabric Discovery. If the library is not attached to an
arbitrated loop, it shall ignore the DTFD bit.
0 = The target attached by an arbitrated loop shall discover a fabric loop
port if present on the loop and perform the public loop functions defined
for targets by FC-FLA.
1 = The target attached by an arbitrated loop shall not recognize the
presence of a fabric loop port on the loop.
PLPB
Prevent Loop Port Bypass. If the library is not attached to an arbitrated
loop, it shall ignore the PLPB bit.
0 = The target allows the Loop Port Bypass (LPB) and Loop Port Enable
(PBE) primitive sequences to control the port bypass circuit and
participation on the loop as specified by FC-AL-2.
1 = The target attached to an FC-AL-2 loop shall ignore any Loop Port
Bypass (LPB) and Loop Port Enable (LPE) primitive sequences.
DDIS
Disable Discovery. If the library is not attached to an arbitrated loop, it shall
ignore the DDIS bit.
0 = The target shall wait to complete target discovery as defined by
FC-PLDA, FC-FLA, and FC-TAPE before allowing processing of tasks to
resume.
1 = The target without a valid FLOGI attached to an arbitrated loop
shall not require receipt of Address or Port Discovery (ADISC or PDISC
ELSs) following loop initialization as described in FC-PLDA and FC-FLA.
DLM
Disable Loop Master. If the library is not attached to an arbitrated loop, it
shall ignore the DLM bit.
0 = The target may participate in loop master arbitration in the normal
manner and, if successful, may become loop master during the loop
initialization process.
1 = The target attached to an FC-AL-2 loop shall not participate in loop
master arbitration and shall not become loop master. The target shall only
repeat LISM frames it receives.

Table of Contents

Other manuals for Oracle storagetek sl150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle storagetek sl150 and is the answer not in the manual?

Oracle storagetek sl150 Specifications

General IconGeneral
BrandOracle
Modelstoragetek sl150
CategoryStorage
LanguageEnglish

Related product manuals