Read Element Status
202 SL150 Interface Reference Manual Julyl 2017
Primary Volume Tag
Information
When the PVolTag bit is set to 1, the library returns volume tag
information. When PVolTag is set to 0, this field is omitted, and the
reserved fields below it are moved up.
The Primary Volume Tag field contains the formatted null-terminated
ASCII barcode label on the tape cartridge.
The "Library Volume Label Format" configuration setting determines the
format of the cartridge label data that is returned in the Primary Volume
Tag Field. The following settings are supported:
• Trim last two characters (default): This field contains the first 6
characters of the cartridge label.
• If the cartridge label is "KL1020L6", this field will contain "KL1020"
and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"KL1020" and the domain and type fields will contain 'L' and '6'.
• Full label: This field contains the first 8 characters of the cartridge label.
• If the cartridge label is "KL1020L6", this field will contain
"KL1020L6" and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"KL102030" and the domain and type fields will contain 'L' and '6'.
• Trim last character: This field contains the first 7 characters of the
cartridge label.
• If the cartridge label is "KL1020L6", this field will contain "KL1020L"
and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"KL10203" and the domain and type fields will contain 'L' and '6'.
• Prepend last two characters: This field contains all characters on the
label after moving the last two characters in the label to the front.
• If the cartridge label is "KL1020L6", this field will contain
"L6KL1020" and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"L6KL10203040" and the domain and type fields will contain 'L' and
'6'.
• Trim first two characters: This field contains the third through eighth
characters on the label.
• If the cartridge label is "KL1020L6", this field will contain "1020L6"
and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"102030" and the domain and type fields will contain 'L' and '6'.
• Trim first character: This field contains the second through eighth
characters on the label.
• If the cartridge label is "KL1020L6", this field will contain "L1020L6"
and the domain and type fields will contain 'L' and '6'.
• If the cartridge label is "KL10203040L6", this field will contain
"L102030" and the domain and type fields will contain 'L' and '6'.
To Next Page
Loading...
Need help?
General