Oriental motor BLH Series - Settings of MEXE02; Timing to Update Data When the Setting Is Changed

42
Settings of MEXE02
9 Settings of
MEXE02
Functions of the product can be extended by extension setting of operation data and setting of parameter using the
MEXE02
.
9.1 Timing to update data when the setting is changed
When a parameter is written to the driver, it is saved in the non-volatile memory. The parameter saved in the non-
volatile memory is stored even after the power supply is turned o. When a parameter is changed, the timing to update
the changed value varies depending on the parameter. See the following four types.
•
Update immediately .......................................Recalculation and setup are immediately executed when the parameter is written.
•
Update after operation stop ........................Recalculation and setup are executed when the operation is stopped.
•
Update after executing conguration .....Recalculation and setup are executed after conguration is executed.
Conguration is executed using the
MEXE02
.
•
Update after turning on the power again ... Recalculation and setup are executed after the power is turned on again.

Notation rules
In this chapter, each update timing is represented in an alphabet.
A: Update immediately
B: Update after operation stop
C: Update after executing conguration or turning the power again
D: Update after turning on the power again