Oriental motor BLH Series - Operation; Guidance; Setting the Operation Data

28
Operation
7 Operation
7.1 Guidance
Driver
Motor
External control devic
e
MEXE02
Input
Output
External
potentiometer
24 VDC
DC power supply
①
Setting the operation data
②
Operation and stop
⇒
"7.6 Operation and stop"
③
Extended functions using
MEXE02
⇒
"9 Settings of
MEXE02
"
7.2 Setting the operation data
7.2.1 Operation data types
Up to 8 operation data can be set. (Operation data No.0 to No.7)
Item Description
Rotation speed Sets the motor rotation speed.
Acceleration time Sets the acceleration time as a time needed for the motor to reach 3000 r/min from a standstill state.
Deceleration time Set the deceleration time as a time needed for the motor to stop from 3000 r/min.
Torque limiting value
Sets when the output torque of the motor is limited.
Sets the torque limiting value based on the motor rated torque being 100%.
7.2.2 Setting methods
Each operation data can be set by any of the following methods.
Rotation speed
⇒
p.30
Acceleration time
and deceleration
time
⇒
p.31
Torque limiting function
⇒
p.32
MEXE02
External potentiometer
MEXE02 MEXE02
External potentiometer
VR1
0 to 5 VDC
1 mA or more
VR1
VR1
0 to 5 VDC
1 mA or more
External DC voltage External DC voltage
VR2
VR2
VR2
PWM signal PWM signal