Oriental motor BLH Series - Mexe02; Starting MEXE02; Monitor

37
MEXE02
8
MEXE02
The
MEXE02
is software to set the data required to operate the motor using a PC.
Refer to the operating manual of the
MEXE02
for how to use such as data editing method and others.
This chapter explains details about the
BLH
Series digital setting type.
8.1 Starting
MEXE02
Select the product.
Series: BLH
Prodcut: BLH Digital Setting Type
8.2 Monitor

Unit information monitor
The unit information monitor is provided in the
MEXE02
.
If this monitor function is used, product information such as model name can be checked.
The setting value of parameters can also be checked.
z
How to view the unit information monitor window
Item Description
Driver user name Monitors the name set in the "Driver user name" parameter.
Product name Monitors the driver model being connected to the
MEXE02
.
Ver. Monitors the software version used.
Main power count Monitors the number of times that the main power supply of the driver is turned on.
Main power supply time
Monitors the cumulative time that has elapsed since the main power supply was turned
on rst time.
Speed upper limit Monitors the setting value of the "Speed upper limit" parameter.
Speed lower limit Monitors the setting value of the "Speed lower limit" parameter.
Torque limiting maximum value Monitors the setting value of the "Torque limiting maximum value" parameter.
Impact softening lter Monitors the setting of the "Impact softening lter" parameter.
Motor rotation direction Monitors the setting of the "Motor rotation direction" parameter.
Operation input mode Monitors the setting of the "Operation input mode selection" parameter.
Deceleration mode selection Monitors the setting of the "Deceleration mode selection" parameter.
External Setting method Monitors the setting of the "External setting method" parameter.