EasyManua.ls Logo

Oriental motor BLH Series - General Specifications; Dimension

Oriental motor BLH Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
Specications
14.2 General specications
Operating environment
Ambient temperature Driver: 0 to +50 °C [+32 to +122 °F] (non-freezing)
Ambient humidity 85% or less (non-condensing)
Altitude Up to 1000 m (3300 ft.) above sea level
Surrounding atmosphere
No corrosive gas, dust, water or oil.
Cannot be used in radioactive materials, magnetic eld, vacuum or other
special environment.
(For details about installation locations, refer to p.9.)
Vibration
Not subject to continuous vibrations or excessive impact.
In conformance with JIS C 60068-2-6 "Sine-wave vibration test method"
Frequency range: 10 to 55 Hz Pulsating amplitude: 0.15 mm (0.006 in.)
Sweep direction: 3 directions (X, Y, Z) Number of sweeps: 20 times
Storage environment
Shipping environment
Ambient temperature Driver:
-
25 to +70 °C [
-
13 to +158 °F] (non-freezing)
Ambient humidity 85% or less (non-condensing)
Altitude Up to 3000 m (10000 ft.) above sea level
Surrounding atmosphere
No corrosive gas, dust, water or oil.
Cannot be used in radioactive materials, magnetic eld, vacuum or other
special environment.
Degree of protection IP00
14.3 Dimension
Mass: 46 g (1.62 oz.) [Unit: mm (in.)]
[50 (1.97)]
Installation of motor cabl
e
34.5±0.2
(1.358±0.008)
6 (0.236)
55 (2.17) max.
4 (0.157)63±0.2 (2.480±0.008)
72 (2.83) max.
3.5 (0.138)
64±0.2 (2.520±0.008)
3.5 (0.138)
27 (1.06) max.
ϕ
3.5 (
ϕ
0.138) Thru
22±0.2
0.866
±0.008
( )

Table of Contents

Other manuals for Oriental motor BLH Series

Related product manuals