Orisec CT-10 - Page 42

42
9
Disarm only
A Disarm only user can only access the disarming options within the user menu.
10
Access Control
An Access Control user is unable to access menus or privileges. Upon entering the code
outputs programmed as 'Access' will trigger for the duration of the 'Access timer'.
11
Access Latching
An Access Latching user is unable to access menus or privileges. Upon entering the code
outputs programmed as 'Access' will trigger and latch.
User Name
Each user can be assigned a 12-character label that is displayed when viewing the event log,
scrolling through programmed users and displayed if ‘Welcome message’ is enabled.
User Areas
Each user must be assigned to one or more areas for them to access the required area of
protection. Users that are assigned to multiple areas will be given the option to select the areas
they want to arm or disarm.
At default ‘Master’ users are assigned all areas; all other users are assigned area 1 only.
User Options
User options add additional requirements for individual users.
No
User Option & description
1
Key fob PA 1+ 2
` Pressing buttons 1 and 2 simultaneously on a wireless key fob will trigger a PA condition.
a Pressing buttons 1 and 2 simultaneously on a wireless key fob will not trigger a PA
condition.
2
Part arm only
` The selected user can only part arm the system.
a The selected user can full and part arm the system.
3
Auto yes
` When the code is entered, the area will instantly begin setting without the need to press
Enter.
a The user must press Enter after accessing the menus to arm the system.
4
Silent full arm
` The selected user will silently full arm the system.
a When the selected user full arms the system, the speakers are active during the exit
procedure.