Orisec CT-10 - Page 43

43
5
Silent part arm
` The selected user will silently part arm the system.
a When the selected user part arms the system, the speakers are active during the exit
procedure.
6
Door Access
` When the selected user enters their code or presents their tag any outputs programmed
as ‘Door Access’ will trigger.
a The selected user will function as normal.
7
Code + Tag
` The selected user must enter their access code and present their NFC tag to gain access
to the system.
a The selected user can access the system with either their access code or NFC tag.
8
Simple Key fob
` When using a wireless key fob the ‘Arm’ button will only be used to full arm the areas
assigned to the user.
a When using a wireless key fob the ‘Arm’ key has the ability to Full arm, Part arm 1, Part
arm 2 and Part arm 3.
9
Key fob Medical 1 + 2
` Pressing buttons 1 and 2 simultaneously on a wireless key fob will trigger a medical
condition.
a Pressing buttons 1 and 2 simultaneously on a wireless key fob will not trigger a medical
condition
NFC
Any NFC (Near Field Communication) tag can be assigned to the system for use.
NFC is a protocol found in everyday devices such as smart phones, bank cards, gym
keys, oyster cards, tablets and more. (Not on CK-10 or CT-10.)
With the NFC option selected within the ‘Add/Delete user’ menu either key in the NFC tag serial
number (if known) or present the tag to the NFC reader (V) on the keypad. If successful, the
NFC tag serial number is shown on the display.
‘Link’ output is on and can be used for locking out selected users for certain conditions, e.g.
you may want to prevent a user from accessing the system over the weekend.
Key Fob
With the key fob option selected, either key in the Wireless key fob serial number or press
button 1 on the key fob.
The key fob will now be learnt to the control panel and will function as per the programming
for selected user.