Made in the U.S.A.
SAFETY INFORMATION
PRACTICE SAFE MAINTENANCE
Proper maintenance is your responsibility. Maintenance neglect and/or poor maintenance
practices can result in injury or death. Always use the proper tools to maintain implement.
AVOID CRUSHING. Make sure all personnel are clear of the implement. Lower implement
to the ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
Store
implement on a clean, dry, and level surface. An uneven surface could cause implement
to shift or fall, resulting in injury or death, as well as implement damage. Securely support
all implement components that must be raised. Store implement away from human
activity.
AVOID ENTANGLEMENT. Never lubricate or service implement in motion. Keep away from
power driven parts when in motion. Disengage power sources prior to maintaining imple-
ment. Injury or death can result from contact with power driven parts when in motion.
AVOID CRUSHING
.
Do not stand between the tractor and implement when connecting
or disconnecting implement. Injury or death can result from being trapped between the
tractor and implement.
Escaping pressurized hydraulic fluid can penetrate skin, resulting in injury or death. Re-
lieve hydraulic system pressure before connecting or disconnecting tractor. Use cardboard
or wood, NOT BODY PARTS, to check for suspected hydraulic leaks. Wear protective
gloves and safety glasses or goggles when working with hydraulic systems. If an accident
occurs, see a doctor immediately for proper treatment.
D A N G E R
off
W A R N I N G
D A N G E R
D A N G E R
D A N G E R
2 - 5
To Next Page
Loading...
