Made in the U.S.A.
MAINTENANCE
IMPLEMENT STORAGE
• Clean and touch up paint seasonally to avoid corrosion and rust. Contact your Orthman
dealer for touch up paint.
• Inspect all safety and Orthman decals and replace if missing or damaged. Contact your
Orthman dealer for replacement decals. (pg. 2 - 8, 2-9)
• Grease all zerks regardless of hourly interval prior to storage. (pg. 7-2)
• Check all hardware according to torque specifications prior to storage. (pg. 7-4)
• Replace all worn or damaged parts prior to storage.
• Store inside if possible. Storing implement inside will prolong the life of the components.
AVOID CRUSHING. Make sure all personnel are clear of the implement. Lower
implement to the ground, place tractor in park, turn off engine, and remove key.
Storing implement on the ground will relieve the tractor three point hitch of hydraulic pres-
sure. Hydraulic systems tend to settle, endangering anything underneath the implement.
USE BAR STANDS TO SUPPORT THE IMPLEMENT.
Store implement on a clean, dry,
and level surface. An uneven surface could cause implement to shift or fall, resulting
in injury or death, as well as implement damage. Securely support all implement
components that must be raised. Store implement away from human activity.
D A N G E R
off
W A R N I N G
8 - 4
To Next Page
Loading...
