Orthman 1tRIPr - Introduction; Table of Contents

Made in the U.S.A.
INTRODUCTION
TABLE OF CONTENTS
FIELD SETTINGS
Toolbar Height and Orientation ....................................................................................................................5 - 1
Row Unit Depth ...........................................................................................................................................5 - 2
Row Unit Down Pressure .............................................................................................................................5 - 3
Trash Opener Assembly Depth ....................................................................................................................5 - 4
Trash Opener Assembly Width ....................................................................................................................5 - 5
Tillage Shank (mole shank and mole knife) Assembly Depth .....................................................................5 - 6
Wavy Coulter Assembly Depth and Width ...................................................................................................5 - 8
Wavy Coulter Assembly Fore and Aft ..........................................................................................................5 - 9
Rolling Basket Down Pressure ...................................................................................................................5 - 10
Standard Shear Bolt Protected Tail ...............................................................................................................5-11
Adjustable Liquid Tubes ...............................................................................................................................5-13
Adjustable Dry Fertilizer Boot ......................................................................................................................5-15
Automatic Reset Linkage .............................................................................................................................5-17
Spring / Set Screw Setting Chart .................................................................................................................5-20
TROUBLESHOOTING
Row unit tooling does not penetrate soil. Wing row units float upward ........................................................6 - 1
Row unit plugs with field residue between the depth band coulter assembly and trash opener assembly ..6 - 2
Row unit plugs with field residue between the trash opener assembly and tillage shank ............................6 - 3
Row unit plugs with field residue between the tillage shank and wavy coulters...........................................6 - 4
Field residue plugs between row units .........................................................................................................6 - 5
Row unit tripping or shear bolt problems......................................................................................................6 - 6
PARTS IDENTIFICATION
Row Unit Assembly ........................................................................................................................... 7 - 1, 7 - 2
Mount and Parallel Linkage Assembly .........................................................................................................7 - 3
Depth Band Coulter Assembly .....................................................................................................................7 - 4
Row Cleaner Assembly ...............................................................................................................................7 - 5
Mole Shank Assembly .................................................................................................................................7 - 6
Mole Knife Assembly ...................................................................................................................................7 - 7
Wavy Coulter Assembly ...............................................................................................................................7 - 8
Trip Linkage Assembly .................................................................................................................................7 - 9
Rolling Basket Assembly ...........................................................................................................................7 - 10
MAINTENANCE
Practice Safe Maintenance ..........................................................................................................................8 - 1
Lubrication - Implement Inspection .............................................................................................................8 - 2
Torque Specifications...................................................................................................................................8 - 3
Implement Storage ......................................................................................................................................8 - 4
Notes ...........................................................................................................................................................8 - 5
1 - 6