Made in the U.S.A.
MAINTENANCE
PRACTICE SAFE MAINTENANCE
Proper maintenance is your responsibility. Maintenance neglect and/or poor maintenance
practices can result in injury or death. Always use the proper tools to maintain implement.
AVOID CRUSHING. Make sure all personnel are clear of the implement. Lower implement
to the ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS AND CYLINDER STOPS TO SUPPORT THE IMPLEMENT.
Park
implement on a clean, dry, and level surface. An uneven surface could cause implement
to shift or fall, resulting in injury or death, as well as implement damage. Securely support
all implement components that must be raised. Remove buildup of grease, oil, or debris
prior to maintaining implement.
AVOID ENTANGLEMENT. Never lubricate or service implement in motion. Keep away from
power driven parts when in motion. Disengage power sources prior to maintaining
implement. Injury or death can result from contact with power driven parts when in
motion.
AVOID CRUSHING
.
Do not stand between the tractor and implement when connecting or
disconnecting implement. Injury or death can result from being trapped between the
tractor and implement.
Escaping pressurized hydraulic fluid can penetrate skin, resulting in injury or death. Re-
lieve hydraulic system pressure before connecting or disconnecting tractor. Use cardboard
or wood, NOT BODY PARTS, to check for suspected hydraulic leaks. Wear protective
gloves and safety glasses or goggles when working with hydraulic systems. If an accident
occurs, see a doctor immediately for proper treatment.
D A N G E R
off
W A R N I N G
D A N G E R
D A N G E R
D A N G E R
8 - 1
To Next Page
Loading...
