Made in the U.S.A.
MAINTENANCE
IMPLEMENT INSPECTION
• When replacement parts are necessary for periodic maintenance and servicing, genu-
ine factory replacement parts must be used to restore implement to original specifica-
tions. Replace broken or worn parts immediately. Contact your Orthman dealer for
replacement parts.
• During break-in (40 hours), check hardware for proper torque every 10 to 20 hours.
(pg. 8 - 4)
• Before each use, check hardware for wear and proper torque. (pg. 8 - 4) Replace dam-
aged or missing hardware with hardware of an identical grade to restore implement to
original specifications.
• Do not allow debris to buildup on any surface of the implement.
• Replace all shields and guards. Be sure all tools, parts, and service equipment are
removed prior to transporting equipment.
LUBRICATION
• Grease - use high quality multi-purpose grease.
• Follow recommended 10 hour service interval illustrated below.
GREASE
10
10
Rolling Basket Bushing
8 - 2
To Next Page
Loading...
