Made in the U.S.A.
PREPARATION AND SETUP
D A N G E R
D A N G E R
PREPARING THE 1TRIPR
Tooling options available for added 1tRIPr® versatility are illustrated and explained in the
tooling options section of this manual. Field adjustments are illustrated and explained in
the field settings section of this manual.
If an Orthman toolbar is used in conjunction with 1tRIPr® row units, be sure to consult the
toolbar operator’s manual before attempting to operate the implement. Read and under-
stand operator manuals for machinery used in conjunction with the 1tRIPr®.
Before each use, check hardware for wear and proper torque. Replace damaged or
missing hardware with hardware of an identical grade to restore implement to original
specifications.
IMPLEMENT TO TRACTOR
CONNECTION
AVOID CRUSHING. Do not stand between tractor and implement when connecting or
disconnecting implement. Injury or death can result from being trapped between the trac-
tor and implement.
AVOID CRUSHING. Make sure all personnel are clear of the implement. Lower implement
to the ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS TO SUPPORT THE IMPLEMENT. Park implement on a clean, dry,
and level surface. An uneven surface could cause implement to shift or fall, resulting in
injury or death, as well as implement damage. Securely support all implement compo-
nents that must be raised.
OPERATOR’S
MANUAL
C A U T I O N
3 - 2
To Next Page
Loading...
