Made in the U.S.A.
TROUBLESHOOTING
D A N G E R
C A U T I O N
C A U T I O N
Be extremely careful working
around unshielded sharp edges.
Injury may result from contact
with sharp edges.
153 - 045
TROUBLESHOOTING
AVOID CRUSHING.
Make sure all personnel are clear of the implement. Lower implement
to the ground, place tractor in park, turn off engine, and remove key.
USE BAR STANDS TO SUPPORT THE IMPLEMENT.
Park implement on a clean, dry,
and level surface. An uneven surface could cause implement to shift or fall, resulting in
injury or death, as well as implement damage. Securely support all implement components
that must be raised. Remove buildup of grease, oil, or debris prior to adjusting rolling basket
down pressure.
PROBLEM:
Row unit does not trip or trips too easily.
Shear bolt will not shear or shears too easily.
SOLUTION OPTIONS:
1. Row unit does not trip or trips too easily.
A. Check to see it ftipping mechanism is installed correctly (pg. 4 - 9 to 4-13).
B. Reference field settings on (pg. 5 - 17 to 5 - 20).
2. Shear bolt will not shear or shears too easily.
A. Reference field settings on (pg. 5 - 11 to 5 - 12).
6 - 6
To Next Page
Loading...
