Installation and Operation Manual of the EUROMATIK.net Page 10 (40)
Connecting a Rollo Solar swimming pool cover
A swimming pool cover of Rollo Solar make can be connected to the terminals
17-24.
This plan represents only a connection example. The applicability of this plan
for the actually used version of the Cover control must be assessed against
the operating instructions for the cover manufacturer.
The contacts can be used to drive a maximum load of 230 V 1 A.
Connecting an Aqua Top swimming pool cover
A swimming pool cover of Aqua Top make can be connected to the terminals
17-24.
This plan represents only a connection example. The applicability of this plan
for the actually used version of the Cover control must be assessed against the
operating instructions for the cover manufacturer.
The contacts can be used to drive a maximum load of 230 V 1 A.
Connecting a Pool-Technics swimming pool cover
A swimming pool cover of Pool Technics make can be connected to the
terminals 17-24.
This plan represents only a connection example. The applicability of this plan
for the actually used version of the Cover control must be assessed against the
operating instructions for the cover manufacturer.
The contacts can be used to drive a maximum load of 230 V 1 A.
Connecting a different swimming pool cover
A swimming pool cover can be connected to the terminals 17-24.
The EUROMATIK can, depending on the configuration, optionally generate
pulse signals (pushbutton mode) or static signals (switch operation).
This plan represents only a connection example. The applicability of this plan for
the actually used version of the Cover control must be assessed against the
operating instructions for the cover manufacturer.
The contacts can be used to drive a maximum load of 230 V 1 A.
To Next Page
Loading...