EasyManua.ls Logo

OSF Euromatik.net - Settings for Party Mode; Activation; Deactivation of Time Limitation; Setting the Time Limit; Settings for Eco Mode

OSF Euromatik.net
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and Operation Manual of the EUROMATIK.net Page 23 (40)
Settings for party mode
Press the "Menu" button in the
control bar.
Press the "Pool" button.
Press the "party mode settings"
button.
Activation / deactivation of time limitation
In the "Party mode" the filtration system runs continuously.
In order to terminate this continuous operation automatically after the
expiry of a certain time, the time limit for party mode must be activated.
Setting the time limit
You can program the max. duration of the party
mode, after which it is terminated automatically.
Finally, press the "OK" button to save the setting.
Settings for eco mode
Press the "Menu" button in the
control bar.
Press the "Pool" button.
Press the "ECO settings" button.
Setting / Deleting the switching times for eco mode
In the "Eco mode" the filtration system runs in the
energy savings mode.
The timer for automatic operations for the timer
switching on and off can be programmed by
pressing the "Eco filtration times" button.
DL means daily. => The operations are carried out
each day at the specified times.
Finally, press the "OK" button to save the setting.
The switching operation time can be deleted by
pressing the garbage box icon. (Picture on the
right).

Table of Contents