Installation and Operation Manual of the EUROMATIK.net Page 33 (40)
Time limit for overflow protections (Pools with
overflow gutter)
For pools having an overflow gutter, a time limit for
the overflow protection (forced switching on) can be
set in this line.
Behavior in case of overfilling
You can configure in this line whether after the
expiry of the time limit, back-flushing should be
triggered automatically in order to remove excess
water from the system, or if the forced switching on
operation should be terminated automatically.
Configuration of backwashing
Selecting the type of backwashing
You can choose the type of backwashing suitable
for the swimming pool in this menu.
no backwashing
6-way valve
plunger valves
Next, press the "OK" button to save the setting.
Filling the overflow tank before backwashing
In this line you can select, if the overflow tank is to
be filled up to the top electrode before the
backwash to provide sufficient water.
Actuating time of plunger valves
For backwashing with plunger valves, you can set
the time in this line for which the filter pump is
switched off while the valve is moving (if
necessary).
Configuration of the attraction output
Selecting the type of attraction
In this menu item you can choose the symbol of the
switch "attraction". There are 15 different symbols
available. Alternatively, the output can be
configured for switching between swimming pool
and spa operation.
Actuating time of valves
For use of the attraction output for swimming pool /
spa switchover, you can set in this line, how long
the filter pump is switched off for the process of
actuating the valves (if necessary).
To Next Page
Loading...