Installation and Operation Manual of the EUROMATIK.net Page 34 (40)
Configuration of the pool cover
Selecting the type of cover
Select the swimming pool cover installed, if any, in
this menu. Next, press the "OK" button and save
the setting. The electrical connection must be made
depending on this setting.
Pause for moving the cover
In this line you can set how long the filter pump is
switched off in the process of moving the cover (if
necessary).
Operating the swimming pool cover via LAN
Operating the cover via the Internet is generally
blocked for the sake of safety. The operation via
LAN is also blocked in the EUROMATIK.net system
at the time of delivery. This control option can only
be released at site. The option should be released
only if the swimming pool can be viewed
unrestrictedly from all LAN control devices and
visual surveillance of the swimming pool is possible
at all times.
Configuration of the floor drain valve
Opening the floor drain during backwashing
This button can be used to set whether the floor
drain valve to be opened during backwashing to
provide sufficient water for backwashing.
Opening the floor drain in eco mode
This button can be used to set whether the floor
drain valve is to be opened in the ECO mode in
order to lay the Spillway dry and to minimize
evaporation losses.
Cyclic intermission of eco-mode
If the floor drain valve is opened in eco mode, a
timer can be programmed to interrupt the direct
water circulation through the floor drain periodically,
to keep the water in the overflow tank conditioned.
Pause for actuating the valve
In this line you can set how long the filter pump is
switched off in the process of moving the floor drain
valve (if necessary).
To Next Page
Loading...