P15:
Tube type
This parameter is used to set the pre-heating time according to the X-ray
tube present.
Using "Increase" and "Decrease" keys select
"Password=123" and confirm pressing "Tooth automatic selection"
key. If a wrong password is selected, after confirms, the next parameter
(P16) will be displayed.
Using "Increase" and "Decrease" keys select the tube type between
Toshiba and CEI.
Default value = Toshiba
P16:
Restore Factory Settings
Select value = ON to restore the system configuration and the custom
time tables to factory default.
After confirmation, the system will restart with factory settings.
NOTE:
All custom settings will be lost.
To Next Page
Loading...