Owon DGE3000 Series - Rear Panel Overview

4.Quick Start
5
9
On/Off button
Turns the output of the CH2 channel on or off. When the
output is turned on, the backlight of the button lights up.
10
Out 2
Output CH2 signal
11
CH1/CH2
Switch channel displayed on the screen between CH1 and
CH2
12
Out 1
Output CH1 signal
13
On/Off button
Turns the output of the CH1 channel on or off. When the
output is turned on, the backlight of the button lights up
14
Waveform
Selection
area
Includes: Sine , Square , Ramp , Pulse ,
Noise , Arb Wave .
Rear Panel Overview
6
4
5
2 3
7
8
1
Figure 4-2: Rear Panel Overview
1
Handle
2
Signal connector
Used to connect the input or output of a
functional signal
3
Counter input
Used to receive the frequency meter input signal
4
AC input connector
AC input connector
5
Fuse Container
The place to install the fuse