3. General Inspection
After you get a new generator, it is recommended that you should make a check
on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in Appendix A: Accessories of
this manual. You can check whether there is any loss of accessories with
reference to this description. If it is found that there is any accessory lost or
damaged, please get in touch with our distributor responsible for this service or our
local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally, or fails in the performance test, please get in
touch with our distributor responsible for this business or our local offices. If there
is damage to the instrument caused by the transportation, please keep the
package. With the transportation department or our distributor responsible for this
business informed about it, a repairing or replacement of the instrument will be
arranged by us.
To Next Page
Loading...
Need help?
General
