Owon XDS4000 Series - Page 69

4.Advanced User Guidebook
63
Persist
When the Persist function is used, the persistence display effect of the picture
tube oscilloscope can be simulated. The reserved original data is displayed in
fade color and the new data is in bright color.
(1) Push the Display button.
(2) Select Persist&Color in the bottom menu.
(3) Select Persist in the right menu.
(4) In the Time menu, select the persist time, including Auto, 50ms—10s and
Infinity.
When the "Auto" option is set for Persist Time, the oscilloscope automatically
determines the persist time.
When the "Infinity" option is set for Persist Time, the measuring points will be stored
till the controlling value is changed.
(5) Select Clear in the bottom menu to erase the results of previous
acquisitions from the display. The oscilloscope will start to accumulate
acquisitions again.
Function
Menu
Setting
Description
Type
Dots
Vect
Only the sampling points are displayed.
The space between the adjacent sampling
points in the display is filled with the vector
form.
Persist
&Color
Persist
ON
OFF
Turn on/off the Persist function.
Time
Auto
50ms-10s
Infinity
Set the persistence mode or time.
Clear
Erase the results of previous acquisitions
from the display. The oscilloscope will start
to accumulate acquisitions again.
Color
ON
OFF
Turn on/off the color temperature function
XY Mode
Enable
ON
OFF
Turn on/off XY display function
Full
Screen
ON
OFF
Turn on/off the full screen view in XY mode
Counter
ON
OFF
Turn on/off counter