Operator's Manual
Issue 14 / Mar 2016
MercuryiPS
©2016 Oxford Instruments NanoScience. All rights reserved.
Page 3
Revision history
This is issue 14 of the MercuryiPS Handbook, as shown in the header at the top of each page.
The changes made to this document and a summary of previous issues are listed in the table
below. Always use the latest issue of the manual.
Revision
Affected
page(s)
Summary of changes
01 All pages
First edition of the
iPS Operator’s Handbook
02 All pages Changes to several GUI pages
03 All pages
Complete update of the
iPS Operator’s Handbook,
describing version 2.0 of MercuryiPS software.
04 All pages Minor edits – Generic Calibration, GPIB, customer support
addresses, to update to 2.2.x of MercuryiPS software.
05 All pages Additional safety and warning notices for regulatory compliance
updates.
06 Pages 111-113 Additional SCPI commands for magnet device added
07 Pages 119-123 Added legacy commands
08 Page 7 & 25 Amendments to compliance statement. Added background field
caution statement.
09 Page 111-113 Updated remote command list.
10 Page 08 Updated certification information
11 Page 134 Correction on Auxiliary port pin functions
12 Many Pages Certification updates and updates relating to firmware 2.2.6.12
13 Page 52 Added Epsilon parameter
14 Various Changes to H&S statements and Intelligent switch.
To Next Page