Operator's Manual
Issue 14 / Mar 2016
MercuryiPS
©2016 Oxford Instruments NanoScience. All rights reserved.
Page 8
Certification compliance statements
The MercuryiPS power supply for superconducting magnets has been tested to the following
standards and certifications:
CE
IEC61010-1: 2010 3
rd
Edition: Safety requirements for electrical equipment for
measurement, control and laboratory use. (Intertek Report No. 101311638LHD-001)
EN61326-1:2013: EMC Immunity standard, EN55011:2009+A1:2010 Emissions standard
Electrical equipment for measurement, control and laboratory use: EMC requirements.
(Intertek Report No.11053804B)
Conforms to ANSI/UL Std. 61010-1: 2012.
Cert. to CAN/CSA Std. C22.2 No. 61010-1-12
Control Number:
XXXXXX
Certification applied for.
c
ETL
us
which is a harmonised standard with UL and CSA
Note: The ETL mark is to be applied
China Restriction of Hazardous Substances
Signed:
Michael Cuthbert
Managing Director
Oxford Instruments NanoScience Limited
To Next Page