Oxford Instruments NanoScience MercuryiPS - Setting the System Date and Time

Operator's Manual
Issue 14 / Mar 2016
/ UMC0071
MercuryiPS
©2016 Oxford Instruments NanoScience. All rights reserved.
Page 35
 Tap once to load a file (such as a sweep table or PID table).
 Tap once to save changes in a table.
 Tap or once to save changes to the page.
 Tap or to leave the current page without making any
changes.
3.5.10 Setting the date and time
This process is a simple example showing how the touch screen is used.
1 Tap Settings on the Home page. This displays the first of several Settings pages.
2 Scroll the tabs using until the Clock tab is displayed.