You can save 4 patterns (1 per Sequencer) on the grid INDEPENDENTLY of the selected sequencer
(1-4).
Once opened, tap any pattern slot of the grid and it will be instantly saved.
A long press of the Save button will temporarily open the SAVE view until you release the button. In
the SAVE view you have to double tap any pattern of the grid to save the currently loaded pattern into
this slot. This way you avoid accidentally overwriting any other pattern.
QUICK ERASE
To quickly Erase one or several patterns at once, tap the Save button to permanently show the
Memory layout in the grid in saving mode, hold the desired patterns and press Shift + Clear.
Fully cleared patterns remain unlit in the storage view.
NOTES ABOUT PATTERN STORAGE
· Each row stores the patterns for each sequencer. Upper row 1 = sequencer 1, row 2 = seq 2, etc.
· Patterns of sequencer 1 can only be saved to and loaded from the slots of row 1 and so on. This
helps to keep the patterns organized.
· Every slot can store one pattern. The sequencer MODE (Mono, Chord, etc.) is part of the stored
data, so different patterns of the same sequencer could be of different modes. The sequencer will
automatically change its mode when the pattern is loaded.
· Other information like MIDI channel and CC assignments is also stored per pattern.
· Saving a pattern means that the current information of the project like BPM, active sequencers,
loaded patterns, cv assignment, etc. are also updated in the memory.
–––––––––––––––––––––
In order to maintain consistency between patterns, we recommend configuring everything necessary
such as MODE, MIDI channel and CC assignments in a first pattern. Then save this pattern in
successive memory slots. Patterns can also be saved as templates to store all the required settings.
–––––––––––––––––––––
LOAD SAVE MENUS
The Load and Save screen menus offer additional options of using the grid. They are also the only
way to load and save projects.
To Next Page
Loading...