· MATRICEAL
Matriceal is a new and innovative generative mode. It consists of 4 independent tracks each of them
with 9 matrices of independent parameters or lanes. Each parameter lane has 16 steps.
The parameters have their own track settings with different Start and End points, speed and direction.
Parameters: Trigger, gate, note, interval, velocity, octave, retrigger, trigger probability and glide.
When the trigger transport reaches a new active trigger, the parameters are evaluated and taken from
their respective transport positions (that can be different from the current trigger position). This way,
different parameters can be decoupled from each other.
TIP
Assigning different lengths and speeds to different parameter lanes can create evolving and complex
patterns with very few steps; this is the magic of the Matriceal mode. And you have 4 tracks in one
single sequencer to experiment with!
LAYOUT
TRACK SETTINGS
Tapping any of the 4 bottom pads in a track area will set it as the selected track. The selected track
is indicated with 4 white lit bottom pads.
Hold any pad of the track settings area to show the track settings screen. It will also change the
selected track.
From left to right:
- Track MIDI Channel, by default it is the same as the sequencer
channel.
- Track Note offset, by default it is the same as the sequencer root
note. It is the base note.
To Next Page
Loading...