Use the UNISON setting with paraphonic modular configurations and synths to control
the pitch of the different oscillators independently, creating unison and glide effects.
–––––––––––––––––––––
You can also output the same signal through different CVs, for example the Trig Envelope of the same
voice through 2 different CVs and each envelope with different attack or the same LFO with different
offset setting.
NOTE VELOCITY
Same as pitch but for the voice velocity information. Note velocity is assigned to the CVs the same
way as note pitch but.
If the CV is set to Vel, the second parameter chooses if gated behavior or not:
- Gated: the voltage is proportional to the note velocity during the length of the note, it goes
back to 0V when the note finishes.
- Not Gated: the voltage of this output is always proportional to the velocity of the last note.
TRIG ENVELOPE
In OXI One we have introduced Trig Envelopes, an Attack-Decay
envelope that changes dynamically with the Velocity and Gate of the
step.
By default, the amplitude of the envelope is proportional to MIDI
velocity and its Decay is proportional to MIDI gate length.
The Attack can be manually adjusted or modulated by any of the
following sources:
- Sequencer’s LFO
- Any of the sequencer’s MOD lanes
This implementation tends a bridge between MIDI and CV messages, by having a dynamic envelope
ready to modulate parameters of your modular synth like VCA, LPG, LPF and any other fun acronyms
on your rack.
–––––––––––––––––––––
You can apply modulation and/or randomization to Gate and Velocity
to also modulate Amplitude and Decay of the Trig Envelope.
–––––––––––––––––––––
To Next Page
Loading...