In these menus, encoder 1 is used to navigate the projects list and project submenus and the
encoder 2 is used to navigate the patterns list and pattern submenu. This may sound unconventional
at first, but it helps to reduce the menu depth and facilitates the navigation when you need to move
from project to patterns or vice versa.
Things that can only be done from these menus are:
- Load patterns from other projects
- Save patterns into a different project
- Load pattern from a template
- Save pattern as a template
- Rename projects and patterns
- Clear projects and patterns
The symbol means the operation needs some time to be performed, from a couple of milliseconds
(like “Clear project ”) to a couple of hundred (“Duplic proj here ”). This means that if you do it
when the OXI One is playing, it may have a negative impact on your performance.
PATTERN MENUS
Some menus differ if the selected slot is the loaded one or not.
Pattern Load menu:
- Reload (from non volatile memory)
- Load from template
- Clear pattern
Pattern Save menu:
- Save pattern (in non volatile memory)
- Rename
- Save as template
- Clear pattern
PROJECT MENUS
Project Load menu:
- Load project (loads the project info and the 4 active patterns from non volatile memory)
Project Save menu (for the loaded project):
- Save project (saves the project info and the 4 currently loaded patterns in non volatile
memory)
- Rename
- Clear project (completely removes the project data and all its patterns from non volatile
memory, reload the project so this action takes effect in the active project).
Project Save menu (if different from the loaded one):
- Duplic proj here (copies the currently loaded project and its patterns into the selected
slot)
- Clear project
To Next Page
Loading...