· POLYPHONIC
Polyphonic allows you to have total freedom of up to 7 notes per step and up to 128 steps.
STEP PARAMETERS
● Glide (only affects the cv outputs set to pitch)
● Probability and logic conditions per note
● Retrigger per note
● Micro offset per note
● Velocity per note
● Octave offset per note
● Gate per note
● 4 modulation lanes per step
Notes can be TIED through different steps.
To enter the same note with different octave offsets you will need to move the grid vertically.
Remember you can do so in two ways:
- Get into the Y Div menu and use the first encoder.
- Push and turn the second encoder in the main sequencer screen.
Since there can be up to 7 notes active per step, adding the 8th note will remove the first previously
entered note and so on.
You can quickly transpose the whole sequence by holding the respective Sequencer button and
pressing any pad. The distance from the lowest note to the pressed pad in the column will dictate the
transposition direction and distance.
You can Copy chord Sequencers and Paste into polyphonic ones to fine tune your chord
progressions.
To Next Page
Loading...