FOLLOWER KEYBOARD
The keyboard in the Follower sequencer will show the set of notes used by the Harmonizer engine in
real time. You can easily perform over that set of notes to get nice musical results.
Notes used by the harmonizer represented in green
NOTES ABOUT THE HARMONIZER
When you place a step in a lower octave the resulting notes being harmonized may not have a lower
pitch, due to the octavation effect of the harmonizer.
So, if there’s a step in C3 and another in C2 in the Follower sequencer, the resulting notes after the
harmonizer engine are one octave from each other (not necessarily a C, it depends on the chord).
But if instead of a C2 or a D2, a B2 is set (still lower than C2), the resulting note depends on the chord
that the master is playing at that moment, and it can result in a higher pitch note. The harmonizer
takes chord degrees starting from the root note C2.
To Next Page
Loading...