9
ENGLISH
Installation
To install your box, follow the instructions from this page up
to page 16.
❖ The supplied equipment
If you have not already done so, remove all the packaging.
You should have the following items:
◆ ViasatHD box (see page 7)
◆ Remote control and batteries (see page 5)
◆ User Guide and pictorial Quick Start Guide
◆ 12 V power-supply unit (see right)
◆ Mains lead - with 2-way connector and
2-pin mains plug (see right)
◆ SCART lead (see right)
◆ HDMI lead (see right)
◆ Ethernet cable (see right)
A SatCR LNB and 25 m coaxial cable may also be supplied
(please ensure your LNB is set up correctly before you
begin installing your box - see page 11).
❖ Where to place your box
Before you start, make sure you will place your TV, box and
other equipment (such as a VCR or DVD player/recorder) in
a convenient location:
◆ Near an easily-accessible mains wall socket
◆ Within reach of your satellite-dish lead
◆ Near an Ethernet connection, for example near a
local network router
WARNING
Before you connect your box to any other equipment,
you must disconnect ALL the equipment from the mains
supply.
Mains lead
SCART lead
HDMI lead
Ethernet cable
12 V power-supply unit
To Next Page
Loading...
