274 Section 3C: Your Connections to the Web and Wireless Devices
4. Tap the Security field, and then tap the network type: Open, WPA-personal, WEP, or
Enterprise.
5. Tap Connect.
6. A series of different screens appears depending on the network type. Enter or select the
following if you are prompted to do so: Username and/or Password, and Certificate.
7. Tap Sign In.
Connect to a Previously Used Network
䢇 If Wi-Fi is turned off: Turn on Wi-Fi (see “Turn Wi-Fi On and Off” on page 271). Your
phone automatically attempts to connect to a previously used network, starting with the
most recently used network.
䢇 If Wi-Fi is turned on but you are not connected to a network: Your phone automatically
attempts to connect to a previously used network, starting with the most recently used
network.
䢇 If you are connected to one network and want to use a different one: Open Wi-Fi . Tap
another network name.
Disconnect From a Network
When you disconnect from a network, you can keep it on your list of known networks so that
your phone can automatically connect to it again. If you remove the network from your list of
known networks, however, you must reconnect to the network. Follow the steps in “Connect to
a New Open Network” on page 272 or “Connect to a New Secure Network” on page 273 to
connect to the network again.
䢇 To disconnect from a network but keep it on your list of known networks: Turn off Wi-Fi
(see “Turn Wi-Fi On and Off” on page 271). (This disconnects from the network.)
䢇 To disconnect from a network and remove it from your list of known networks: Open
Wi-Fi . (Tap the network name, and then tap Forget Network.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
